Dantotsu heater L size Made in Japan
It is a far-infrared
heater which is attached to the cage's lid (top board) and warms a wide range from the top. Ideal for snakes and lizards that are wound around lights and are afraid of burning.
Besides, because the turtle has lungs directly under the shell, heating from above is effective.
● Since it can be sprayed, it is also ideal for creatures that require moisture.
● Cage size used: Width (23.6 inch - 35.4 inch) Height (15.7 inch - 23.6 inch) ※ Can not be used underwater.
● Product dimensions: 8.27 x 9.84 x 15.7 inch
● Weight 660 g
Asahi Electronics Thermostat
Body size (width X depth X height): 8.5 × 5.6 × 3.8 cm
Body weight: 240 g
Voltage 100 V
● Equivalent performance can be obtained with about 1/3 power consumption of the heat retaining ball.
Mounting method: Install the screw and washer in the hole of the main body. Please process yourself like a screw hole in the cage's top cover (top plate).
It is a wide heater to be used attached to the upper part inside the cage. It is a wide heater that spreads strongly downward (it is not the type to lay on the bottom)
Recommended for cold areas and babies, elderly animals, poor physical condition. When used in conjunction with a heat retention heater that warms from below, more heat retention will improve.
It can also be recommended for animals that will be broken by being a heater placed at the bottom. Please check whether it meets the shape of the cage.
Increase radiant effect by special insulation material and technical
devises, radiate more than about 90% of the heat downward.
Since we do not use a heat retaining ball, there is no worry about breaking bulbs, DANTOTU is excellent in durability and economy.
Since the
heater instrument itself will not become hot, it is safe to touch animals. Warm the interior of the cage by the effect of far infrared rays.
Warmth
retainability varies depending on the height and structure of the cage, but if it becomes too hot, you can adjust by using a thermostat in combination.
Equivalent performance can be obtained with power consumption of about 1/3 of the heat retaining sphere.
Warm room temperature can be obtained by using in combination with bottom
heater.
It is a heater with good compatibility with acrylic breeding cage.
[Examination example of temperature]
In the case of 23.6 inch aquarium (width 23.6, depth 11.7 height 14.1 inch)
"DANTOTU" surface 99.0 °C
"DANTOTU" under 3.93
inch 29.9 °C
"DANTOTU" under 7.87
inch 24.5 °C
"DANTOTU" under 11.8
inch 24.0 °C
Top right in the tank 23.7 ℃
(It is very safe because it does not feel high temperature even if you touch it due to the effect of the
nonwoven fabric on the surface)
* Temperature is the value after 60 minutes of
energization at ambient temperature of 20.0 ℃.
Data differs between aquarium cage and regular cage.
Heaters for reptiles "DANTOTU"
Electricity bill for each month is about 1/3 of the heat keeping ball due to
initial investment!
The reptiles are also delighted with outstanding cost performance as well as
ruggedness and running cost!
■ Benefits of DANTOTU (DANTOTU / M size case)
1. Electricity bill
As one of the big advantages of DANTOTU, it can be pointed out that the same heat retention power is enough for electricity bills to be 1/3 of the 100 W heat retaining ball.
In the case of 1 kW (0.13 m), the electricity cost when using a 100 W heat-retaining ball for 24 hours 1 month is (9.36 ￡), whereas in DANTOTU (M size) it is (3.26 ￡)!
Monthly (6.11 ￡) will be cheaper as well. Continuing this for 1 year (73.27 ￡) also deals (^ o ^)
2. Running cost
Furthermore, since DANTOTU has no light bulb, there is no need to replace the light bulb. Since it is said that the life of the heat-retaining ball is 3 to 4 months, it is necessary to change
it 2 to 3 times a year (in the case of not using it in the summer).
Doing so will cost you a running cost of 19.27 ￡ (28.91 ￡) per year. (Let one light bulb (9.64 ￡))
Including that difference will be annual (89.48 ￡) ~ (103.25 ￡)
difference!
Looking at the blogs of people using DANTOTU, it is overwhelmingly overwhelming that "I use it for over 8 years" or "I remember so for about 10 years" that it was broken in about a year No voice was seen.
If you buy it once, if you keep
in keeping with the precautions
on use it will not break for several years, it is a strong and affordable insulation tool.
3. Water resistance
When misting on a reptile cage, a light bulb may be cracked accidentally when it comes to a heat retaining bulb or a basking light, but DANTOTU has no worries of being broken because it uses water repellent.
However, because it is not completely waterproof, you should not use it underwater or water it unnecessarily. Also, please keep in mind that bringing moisture near the outlet plug and its vicinity may cause fire or electric shock.
4. Compare the thermal insulation ball and DANTOTU, although the same warmth (same W number), the electricity bill
is different so much.
A comparison of electricity charges for each one month when calculated as 1 KW = (0.13 ￡) is listed.
・ One month's electricity bill when using the thermal insulation ball (100 W
)for 24 hours
0.100×24 hours × 30 days 1 KW (0.13 ￡) = (9.36 ￡)
・ One month electricity cost when using DANTOTU / M size (32 W) for 24 hours
0.100×24 hours × 30 days 1 KW (0.13 ￡) = (3.26 ￡)
For use, a transformer that can use electric appliances made in Japan is required.
Japan's voltage is 100V. Overseas voltage ranges from 110V to 240V.
In such overseas high voltage environments,
if a Japanese-made electric product is connected, a strong voltage may burden the equipment and cause malfunction ....
It is very dangerous in some cases due to fear of ignition.
When using electric products in overseas high voltage environments,
"Transformer (transformer)" is needed to match the voltage of that country to the equipment that uses it.
Down transformer> 200V ~ 240V compatible transformer> 200V ~ 240V correspondence Large transformer is necess
★important/Note.
■ Please be sure to use within 510W.
■ When using motors / electric appliances such as electric heaters that generate heat through a transformer, please choose a transformer with sufficient capacity.
(Approximately twice the power consumption of electric appliances is a standard)
■ When using continuously for more than 30 minutes, please use with a capacity of 80% or less. (Since the power consumption varies depending on * electrical appliances, please check in advance
